You can edit points.
- Add a new point on the map
- Select and edit points from the main window list
Adding Points
When you click on the map using the configured trigger, a point
is added.
If no item is selected in the edit point list, the point is
added to the end. If an item is selected, the point is added below
the selected row.
You can right-click on the list view and use Select Clear to clear the selection.
Transfer from Main Window
When you select points in the main window and open the edit window, the selected data is transferred to the edit point list.
Edit This: Directly Edit the Current Data
When you select [Edit This] from the right-click menu in the main window, Edit mode opens for that point. In this mode, the No. from the main window is preserved even if Recalculate No. is enabled.
Editing Points
Use one of the following operations on the point you want to edit.
- Double-click the point with the left mouse button
- Right-click the point and select Edit
- Right-click the list view and select Edit
- Press ENTER in the list view
Edit Mode
Change each item in the point edit area.
Point Edit
| Item | Unit | Description |
|---|---|---|
| No | No | |
| Time | Local time | |
| Latitude | Latitude | |
| Longitude | Longitude | |
| Elevation | m | Elevation |
| Speed | km/h | Speed |
| Distance | m | Distance |
| Gap | m | Distance from the previous point |
| Slope | % | Slope |
| Heading | Heading | |
| Label | Label | |
| Description | Description | |
| Update button | Apply to the edit list |
| Key | Operation |
|---|---|
| ↓ | Move cursor down |
| ↑ | Move cursor up |
| TAB | Move cursor to the next item |
| ESC | Cancel editing |
Recalculate
Recalculates the items configured on the Option tab.
| Item | Description |
|---|---|
| Add Point | Recalculate every time a point is added |
| Update button | Run recalculation |
Time Auto Assign
Automatically assigns time.
| Item | Description | |
|---|---|---|
| Method | from Now | Assign based on the current time |
| from First | Assign based on the first row | |
| Interval | Set the interval (seconds) | |
| Update button | Run time assignment |
Time is assigned from top to bottom using method + interval.
Elevation: Assign Elevation
Sets the elevation assignment method.
| Item | Description | |
|---|---|---|
| Method | None | Do not assign |
| Japan GSI | Assign using information from the Geospatial Information Authority of Japan (Japan only) | |
| Open-Elevation | Assign using Open-Elevation | |
| Update button | Run elevation assignment |
The application accesses each server and assigns elevation from top to bottom.
Apply to GPX List
Applies the edit point list to the GPX point list in the main window.
| Item | Description | |
|---|---|---|
| Mode | Append | Add to the end |
| Overwrite | Overwrite data with the same No. | |
| Insert | Insert at the specified position | |
| Apply button | Run |
Append on overwrite failure: add items that cannot be
overwritten to the end
"Append" adds items to the end of the GPX point list in the main window. "Insert" inserts items below the number specified by Insert No. "Overwrite" overwrites data with the same No. If the target No. does not exist in the GPX point list in the main window, the operation is treated as a failure. If "Append on overwrite failure" is enabled, failed items are added to the end. If it is disabled, failed items are discarded.
Densify: Fill Points
Fills points between existing points.
| Item | Unit | Description |
|---|---|---|
| Spacing | m | Specify the fill interval in meters |
| Go button | Run |
If the distance between A and B is equal to or greater than the fill interval, fill points are added between A and B.
Start/End Pins
You can place Start/End pins as editing guides. In the map
edit window, right-click an edit point and select "Start Point" or
"End Point" to place a Start/End pin on that point. Double-click
the pin to clear it.
Importing a Google Maps URL
Imports a URL searched in Google Maps. The search keyword is
set as the label.
Integration with Google Map Route
Exports the data being edited to a Google Maps route.
Set
Start/End points and add waypoints as needed. Use [Map]-[Google
Map Route] on the map window to export the route to Google
Maps.
